Description
NOV Upper IBOP Soft Seal Repair Kit – P/N 30177083-1
The NOV Upper IBOP Soft Seal Repair Kit, identified by part number 30177083-1, is a maintenance kit intended for the replacement of soft sealing components in compatible upper Internal Blowout Preventer valve assemblies used in NOV top drive systems.
The Upper IBOP is an important component within the top drive drilling assembly. During scheduled maintenance or valve servicing, its soft sealing elements may require inspection and replacement due to normal operating wear, pressure cycles, temperature exposure, drilling-fluid contact or extended service intervals.
This repair kit provides the soft-seal replacement option associated with NOV part number 30177083-1. It should not be confused with NOV part number 30177083-2, which is generally identified as the complete Upper IBOP repair kit.
Soft Seal Repair Kit for Upper IBOP Maintenance
The NOV Upper IBOP Soft Seal Repair Kit is intended for maintenance activities where replacement of the valve’s soft sealing components is required without automatically replacing every component included in a complete overhaul kit.
Soft seals are used to support pressure containment and reliable operation within the applicable IBOP assembly. Their condition should be evaluated during inspection and servicing according to the relevant NOV maintenance procedures, equipment manual and operating history.
The exact quantity, dimensions and material specifications of the seals included in the kit should be verified using the OEM packing list, repair-kit drawing or documentation supplied with the product. Individual kit contents should not be assumed solely from the general product description.
Difference Between P/N 30177083-1 and 30177083-2
NOV part number 30177083-1 is identified as the soft-seal repair kit. NOV part number 30177083-2 is separately identified as the complete repair kit for the Upper IBOP.
Customers should determine which kit is required based on the condition of the valve and the scope of the planned maintenance:
- 30177083-1: Upper IBOP soft-seal repair kit
- 30177083-2: Upper IBOP complete repair kit
- 30177083-DWG: Associated repair-kit drawing reference
The complete repair kit may contain additional service components beyond the soft sealing elements. Final selection should therefore be made by qualified maintenance personnel after inspection of the Upper IBOP assembly.
Application in NOV Top Drive Systems
The NOV Upper IBOP Soft Seal Repair Kit is associated with Upper IBOP maintenance in NOV and Varco top drive equipment. The part number appears in top drive spare-parts references, including documentation and parts listings associated with drilling top drive systems.
Compatibility must not be determined only by the general equipment description. Different top drive configurations, valve revisions, service ratings and IBOP assemblies may require different seal kits or repair components.
Before ordering, verify the exact Upper IBOP valve part number, equipment model, serial number and revision. When available, compare the requested item with the original NOV parts manual or maintenance documentation for the installed top drive.
Upper IBOP Function
An Upper IBOP is installed in the top drive drill-string flow path and forms part of the drilling system’s internal pressure-control arrangement. It is designed to open or close the internal drilling-fluid passage according to the top drive and pipehandler operating configuration.
Reliable sealing is essential to the correct operation of the valve. Damaged, hardened, worn or incorrectly installed seals can affect performance. Maintenance should therefore be completed according to approved procedures and by technicians familiar with the applicable NOV top drive and IBOP assembly.
Recommended Compatibility Checks
Before purchasing the NOV Upper IBOP Soft Seal Repair Kit, verify the following information:
- Required part number: 30177083-1
- Equipment manufacturer: NOV or Varco
- Top drive model and serial number
- Upper IBOP valve assembly part number
- Valve revision or configuration
- Standard-service or special-service requirements
- Existing repair-kit or seal-kit number
- OEM drawing and parts-manual reference
- Required quantity
A clear photograph of the original packaging, label or previous repair kit can assist with identification. The top drive nameplate and Upper IBOP markings should also be provided when requesting technical confirmation.
Installation and Maintenance Considerations
Installation should be performed only by trained and authorized personnel. Before beginning maintenance, the drilling equipment must be isolated, depressurized and secured in accordance with the site’s approved safety and lockout procedures.
All sealing surfaces, grooves and related valve components should be inspected before fitting the new seals. Damaged metallic components, excessive corrosion, scoring or dimensional wear may require additional repair or replacement beyond the scope of the soft-seal kit.
Seals must be installed in the correct positions and orientation using suitable procedures and approved lubricants where specified. Improper installation may damage the sealing components or affect valve performance.
After assembly, the Upper IBOP should be tested and inspected according to the applicable NOV manual, maintenance program and site requirements before being returned to operation.
Key Product Information
- Manufacturer reference: NOV / Varco
- Product type: Upper IBOP soft-seal repair kit
- Part number: 30177083-1
- Application: Upper IBOP valve maintenance
- Equipment category: Top drive system
- Kit scope: Soft sealing components
- Related complete kit: 30177083-2
- Related drawing reference: 30177083-DWG
Ordering Information
When requesting a quotation for the NOV Upper IBOP Soft Seal Repair Kit, provide part number 30177083-1, the required quantity and all available equipment information.
The top drive model, serial number and Upper IBOP valve part number should be included whenever possible. Final compatibility and kit contents must be confirmed against the applicable OEM documentation before order placement.
Oil Well Direct supplies drilling equipment, top drive spare parts, IBOP components and industrial maintenance items for offshore and land drilling applications. Product availability, condition, certification and exact scope of supply are subject to confirmation at the quotation stage.
Official NOV page for marine and drilling equipment spare parts, including replacement parts and technical support for drilling rig equipment.
Why Choose Oil Well Direct?
Oil Well Direct supplies certified drilling equipment spare parts with:
-
17+ years oilfield supply experience
-
Ready stock availability
-
Competitive pricing
-
Fast global shipping
-
Technical sourcing support
Contact us today for pricing, availability, and delivery details.
