Description
PEC 150 Ohm 225W Resistor
The PEC 150 Ohm 225W Resistor is a high-power wirewound electrical resistor designed for generator panels, SCR control systems and demanding industrial electrical applications. It has a nominal resistance value of 150 ohms, identified by the resistance code 150R, and a rated power capacity of 225 watts.
This power resistor is suitable for circuits that require controlled current flow, voltage reduction and reliable dissipation of electrical energy. Its wirewound construction provides the durability and power-handling capability required in generator control panels and other heavy-duty electrical systems.
Application in Generator Control Panels
Generator control panels contain electrical and electronic components responsible for controlling, protecting and monitoring generator operation. Power resistors may be used in these panels to limit electrical current, reduce voltage, discharge stored electrical energy or protect sensitive switching components.
The PEC 150 Ohm 225W Resistor can be used as a replacement component in generator panels where the original design requires a 150-ohm wirewound resistor with a 225-watt power rating. The exact function of the resistor depends on the electrical schematic and design of the generator control system.
Before replacing an existing resistor, the resistance value, wattage, dimensions, terminal arrangement and mounting configuration should be compared with the original component.
Suitable for SCR Control Systems
SCR, or silicon-controlled rectifier, technology is widely used in industrial power-control systems. SCR panels can regulate electrical current and voltage supplied to different sections of a generator or industrial control circuit.
Within an SCR panel, a wirewound resistor may be used for current limiting, voltage division, damping, discharge or circuit protection. The PEC 150 Ohm 225W Resistor provides the high-power capacity required for applications where a considerable amount of electrical energy must be converted into heat.
Because SCR panel designs vary between manufacturers, compatibility should always be verified using the equipment manual, circuit diagram or markings on the original resistor.
High-Power Wirewound Construction
Wirewound resistors are constructed by winding resistance wire around an electrically insulating core. This construction provides stable resistance and dependable performance in applications requiring higher power handling than conventional low-wattage resistors.
The wirewound design is particularly suitable for industrial circuits exposed to electrical loading, switching conditions and repeated heating cycles. A properly selected wirewound power resistor can provide reliable operation when installed within its specified electrical and environmental limits.
The 225-watt rating indicates the resistor’s power-dissipation capability under specified operating and temperature conditions. Sufficient airflow and suitable mounting are important because high-power resistors can generate significant heat during operation.
Main Technical Specifications
- Brand: PEC
- Product type: Power resistor
- Resistance value: 150 Ohm
- Resistance code: 150R
- Rated power: 225 W
- Construction: Wirewound
- Application: Generator control system
- Panel type: Generator panel
- Control technology: SCR
- Manufacturer marking: PEC HYD
Features and Benefits
- High 225-watt power-handling capacity
- Stable 150-ohm resistance value
- Heavy-duty wirewound construction
- Suitable for generator control panels
- Compatible with applicable SCR control circuits
- Suitable for current-limiting applications
- Supports controlled electrical energy dissipation
- Designed for industrial electrical systems
- Suitable for repair and maintenance requirements
Typical Industrial Applications
The PEC 150 Ohm 225W Resistor may be suitable for use in generator panels, SCR panels, industrial power-control equipment, voltage-reduction circuits, current-limiting circuits, discharge circuits and electrical energy-dissipation systems.
It may also be used in maintenance and repair projects where an existing 150R 225W wirewound resistor must be replaced. The final suitability of the component depends on the electrical requirements and physical design of the equipment.
Heat Dissipation and Installation
A high-power resistor converts electrical energy into heat during operation. The resistor should therefore be installed in a location with adequate ventilation and sufficient clearance from cables, plastic parts, insulation materials and other heat-sensitive components.
The resistor must be securely mounted using the correct supports and terminal connections. Loose electrical connections can cause excessive heating, voltage drop or damage to the resistor and surrounding equipment.
Installation should only be performed after the generator panel has been safely isolated from all electrical power sources. Qualified personnel should follow the original equipment manufacturer’s maintenance and safety procedures.
Compatibility Verification
Resistance and wattage are not the only factors required when selecting a replacement resistor. The physical length, body diameter, terminal type, mounting method, tolerance and environmental rating should also be checked.
Before ordering, compare the PEC 150 Ohm 225W Resistor with the complete marking and dimensions of the existing component. Photographs of the resistor, terminal arrangement and installation position can also help confirm compatibility.
Ordering Information
When requesting a quotation, provide the required quantity, resistance value, power rating and any available photographs or dimensions. If the original PEC series or manufacturer part number is visible, it should also be provided to ensure accurate identification.
The markings “PEC HYD,” “150R,” “225W” and “W.W.” indicate the manufacturer marking, resistance value, rated power and wirewound construction. However, the exact model or series should not be assumed unless it is confirmed from the complete product marking or dimensional specifications.
Official PEC product page for the PVR225 vitreous enamelled tubular power resistor, featuring a 225W power rating, radial lug terminals and a resistance range from 3.3 ohms to 47 kilohms.
Why Choose Oil Well Direct?
Oil Well Direct supplies certified drilling equipment spare parts with:
-
17+ years oilfield supply experience
-
Ready stock availability
-
Competitive pricing
-
Fast global shipping
-
Technical sourcing support
Contact us today for pricing, availability, and delivery details.
